中元机床制造有限公司

Zhongyuan Machine Tool Manufacturing Co,.Ltd.

拿起手机拨打

热线电话

400-001-8556
QC11K系列液压闸式数控剪板机
来源:网站管理员 点击数:次 更新时间:2021-06-26

产品说明:
1.第二代液压剪板机;
2.采用钢板焊接结构,通过振动时效消除应力,有很好的刚性和稳定性;
3.采用三点支承滚动导轨,消除支承间隙提高剪切质量;
4.刀片间隙用手轮调整、迅速、准确、方便;
5.矩形刀片,四个刃口均可使用,使用寿命长;
6.剪切角可调,减少板料扭曲变形;
7.上刀架采用内倾结构,便于落料,并提高工件的精度;
8.具有分段剪切功能,具有灯光对线的功能;
9.机动后档料,数字显示;
10.后托料装置(可另选择配置);

1. second generation hydraulic shear plate machine.
2. steel plate welded structure is adopted to eliminate stress through vibratory stress relief, and has good rigidity and stability.
3. adopt three point supporting rolling guide to eliminate the supporting clearance and improve the shearing quality.
4. the blade gap is adjusted by hand wheel quickly, accurately and conveniently.
5. rectangular blade, four blades can be used, long service life.
6. the shear angle can be adjusted to reduce the distortion of the sheet material.
7. the upper tool carrier adopts an introverted structure to facilitate blanking and improve the accuracy of the workpiece.
8., it has segmented shearing function and has the function of light to line.
9. post gear, digital display.
10. rear support device (alternative configuration).

可选配的数控系统:

33.jpg技术参数表:

333.jpg

Copyright © 2018-2021,www.symtcn.com,All rights reserved 版权所有 © 马鞍山市中元机床制造有限公司

皖ICP备18015380号-1 辰光网络